Phenix Technologies Canada Recloser Test Equipment

Recloser Test Equipment

Verify the proper operation of automatic circuit reclosers using simulated fault conditions. These systems provide a variable high current output, a computer-controlled impedance compensation circuit, and the instrumentation required to efficiently test nearly all single or three phase direct acting reclosers and sectionalizers. They can also be used for primary injection testing of electronically controlled reclosers.

Simple operation with computer-based controls and WINRCL software provides automation of testing procedures, storage of test data, and test report generation.

Both models will perform the following three
main tests, display and record the results.

  • Minimum Pickup Test – determines
    the reclosers minimum operating point
    (usually two times the rating to the coil).
  • Sequence Test – verifies the proper
    operating sequence of the recloser
    to lock-out.
  • Sectionalizer Test – performed by
    pulsing current to the sectionalizer to
    stimulate a recloser in operation and
    the normal sequence to reach lock-out.
Model Output Power
RCL-19 19 kVA
RCL-47 47 kVA

Microhmmeter-Contact Resistance Meters

The MRM Series will accurately measure very low contact resistances on all types of electrical products including switches and circuit breaker contacts, transformer and motor windings, wire and cable samples, joints in busbars, or any application where low resistance current is required.

  • 4-wire Kelvin measurement
  • Easy to read digital screen display
  • Printable test results via external or built-in printer
  • IEC safety compliant
1 mA-10 A, 1 µΩ resolution, rechargeable battery
1 mA-10 A, 0.1 µΩ resolution, Enhanced Accuracy
Up to 100 A (True DC), 0.1 µΩ resolution,
Built-in memory and printer
5 A-200 A (True DC), 0.1 µΩ resolution,
Built-in memory

15-200 kV Field and Lab AC Dielectric Test Sets

The 6CP line is a complete test system in a mobile package, simple to set-up and operate, lightweight and ruggedly constructed. The 6CP line consists of a combination control and regulator enclosure and separate high voltage section.

Model Output Range
6CP30/15-3 ≈0-15 kV, 200 mA & ≈0-30 kV, 100 mA
6CP50/10-3 ≈0-10 kV, 300 mA & ≈0-50 kV, 60 mA
6CP100/50-7.5 ≈0-50 kV, 150 mA & ≈0-100 kV, 75 mA
6CP120/60-7.5 ≈0-60 kV, 125 mA & ≈0-120 kV, 62.5 mA
6CP100/50-10 ≈0-50 kV, 200 mA & ≈0-100 kV, 100 mA
6CP120/60-10 ≈0-60 kV, 166 mA & ≈0-120 kV, 83 mA
6CP200/100-10 ≈0-100 kV, 100 mA & ≈0-200 kV, 50 mA